Canon CanoScan N1240U User Manual page 56

chapter 4
Scanning an
Original
Contents
Troubleshooting
Glossary
Index
Previewing and Scanning an
You can preview and scan an image in either the Simple Mode or the
Advanced Mode. This section describes both procedures.
Scanning in the Simple Mode
This is a brief overview of the general procedure for previewing and
scanning an original in the Simple Mode.
1.
Place the original on the scanner.
For details about positioning the original on the scanner,
see your scanner user's manual.
Note
2. Start the software application you are going to use. (for example
ArcSoft PhotoStudio)
With Windows, if other TWAIN driver is installed on your computer,
you must choose this scanner. Click the [File] menu and select [Select
Source], and select [CanoScan N670U / N676U] or [CanoScan
N1240U] on the dialog box.
Original
56