Canon CanoScan N1240U User Manual page 37

chapter 3
What is on the
Screen?
Contents
Troubleshooting
Glossary
Index
Color Settings
When the Color Mode is set to Color, you can select the color adjusting
method for scanning from Recommended or Canon ColorGear (or ColorSync)
Color Matching. The default setting is Recommended.
• Recommended
Reproduces the colors of the scanned item vividly on a computer
display. You are advised to use this mode under normal circumstances.
• Canon ColorGear Color Matching (Windows)
• ColorSync Color Matching (Macintosh)
Automatically matches the color settings of the scanner, computer
display and color printer. Select this mode when you wish to set the
appropriate color profile to view the colors of the scanned image on
the computer display as closely matched to the original image as
possible.
When you specify "Canon ColorGear Color Matching" or
"ColorSync Color Matching" setting, the Auto Tone
button will be grayed out and the Tone sheet in the
Note
Advanced Mode will not be displayed.
Test Scanner
Click this button to open the Scanner Diagnostics dialog box. Click the Start
button in the Scanner Diagnostics dialog box to test your Scanner. After the
test is complete, a message is displayed here to inform you of the results. If
a problem is reported after the test, use your scanner instructions to
troubleshoot the problem. During the test, do not open the document
cover of the scanner.
Calibration
Click this button to start calibration. Calibration is the adjustment of color
processing for input and output devices so the colors in the scanned image
match the colors you see on the computer screen and in the printed image.
During calibration, do not open the document cover of the scanner.
37