HP Integrity BL860c Release Note page 9

The driver now marks the "Operational Status" as "UP" when driver initialization is
successfully completed.
• When the HP-PB Token Ring card is used with a Token ring card supporting
4500 MTU size, the network may hang.
Since the maximum size for the HP-PB Token Ring card is 4170, it will ignore incoming
packets of a size greater than 4170. Some vendor cards support 4500 as the maximum
MTU, therefore, the maximum MTU size for the HP-PB Token Ring card must be
increased.
The maximum MTU size for the HP-PB Token Ring card has been increased to the
standard 4500, and the default MTU is set to 4170. The user may increase this to 4500
using the lanadmin command.
• SAM gives an error when configuring HP-PB Token Ring card.
The cause of this defect was incorrect syntax usage for a shell command in the
initialization script /usr/sbin/hptoken_init.
The syntax has been corrected.
Patch PHNE_15000:
• The IP multicast feature does not work.
In the token2_hw_req() file, the code to swap the MAC address before setting the
destination address to the functional address is not needed, since the driver gets the bits in
the right format from the upper layer.
HP-PB Token Ring Release Notes for HP-UX 11.0
Patches and Fixes for this Version (B.11.00.07)
9