Dell PowerApp .cache 100 Installation

   
    
This document provides information on installing tab covers on Dell PowerApp 100
appliances.
To install tab covers on a Dell PowerApp 100 system, perform the following steps for
each tab.
CAUTION: The system's 2-post flush mount slide-rail mechanism does not have
a safety stop. Use care when sliding the system in and out of the rack; the sys-
tem could fall out of the rack, possibly resulting in bodily injury and damage to
the system.
1.
2.
3.

       
4.
This completes the installation of the tab cover.
  
Push the system completely into the rack.
Center the thumbscrew on the tab cover with the clearance hole on the server
tab.
Align the tab cover slot with the opening on the server tab (see Figure 1).
thumbscrew
Hold the tab cover firmly onto the server tab and engage the thumbscrew with
the receiving fastener on the slide bracket.

  
server tab