Swisher PowerBlade PBB-7530 Assembly Instructions
Swisher PowerBlade PBB-7530 Assembly Instructions

Swisher PowerBlade PBB-7530 Assembly Instructions

For bombardier models 330 outlander 04, 400 outlander max 04, 400 outlander 4x4 03-05

Advertisement

Quick Links

PBB-7530
Bombardier Models
330 Outlander 04
400 Outlander Max 04
400 Outlander 4X4 03-05
May fit additional models see Master List
Caution: Do not exceed 5 MPH with the blade or it's brackets installed
Remove the mount plate for trail riding where extra ground clearance is needed
12990 Rev 06-312
1602 Corporate drive
P.O. Box 67
Warrensburg, MO 64093
1-877-627-5860
Front
Partial Frame View

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PowerBlade PBB-7530 and is the answer not in the manual?

Questions and answers

Summary of Contents for Swisher PowerBlade PBB-7530

  • Page 1 PBB-7530 Bombardier Models 330 Outlander 04 400 Outlander Max 04 400 Outlander 4X4 03-05 May fit additional models see Master List Partial Frame View Front Caution: Do not exceed 5 MPH with the blade or it’s brackets installed Remove the mount plate for trail riding where extra ground clearance is needed 1602 Corporate drive P.O.
  • Page 2 Assembly Instructions Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need to be removed. Please retain plate and hardware to be reinstalled if the plate is removed.. Place the mount plate up against the bottom of the frame. The Blade Mounting Tabs should be pointing down and located toward the front of the ATV.

Table of Contents