Setting Up The Player; Connecting The Unit To A Tv; Connecting External Audio - Iluv I1255 Instruction Manual

5.1 - channel slim desktop ipod / dvd player
Hide thumbs Also See for I1255:
Table of Contents

Advertisement

V10M10_IM_EN_02142008
GETTING STARTED

Setting up the Player

It is recommended that you keep the unit unplugged and disconnected from the wall unit while
connecting the unit.

Connecting the Unit to a TV

Composite Video (iPod and DVD) – Connect the video cable from the Video Out
jack on the back of the player to the Video In jack on your television set.
S-Video (iPod and DVD) – For better video quality, connect the player to your
television set using an S-Video cable (not included). Connect the cable from the S-
Video Out jack on the back of the player to the S-Video In jack on the television set.
SCART Video (European version, DVD only) – If you connect the unit to your
television set using a SCART cable, set the
Y, Pb, Pr (DVD only) – Use a Component cable (not included) to connect the unit to
a television set. Set the
Progressive Scan, set the

Connecting External Audio

The back panel of the iPod/DVD player provides:
COAXIAL Out: Connects to an external audio decoder.
Note on iPod connections
Video connection: Your iPod does not support component (Y, Pb, Pr) video output,
so always connect to composite video or S-Video for iPod play.
Audio connection: Your iPod does not support 5.1 channel audio output and digital
audio output, so always connect to audio FR, FL channels for iPod play.
Before plugging the power cord into the AC outlet, check to make sure all of the connections
have been properly completed. When they have been, carefully plug power cord into outlet.
Press the POWER switch on the rear side to turn on the unit, the power indicator will light up. If
unit is in standby state, press the POWER button on the front panel to power the unit. The
display panel will light.
When the unit is initially powered, a brief surge of electricity may cause interference with other
electronic equipment on the same circuit. If this occurs, connect the unit to an outlet on a
different circuit.
[Video]
[Video]
to Interlace YUV. If the television supports
[Video]
to P-Scan Y, Pb, Pr.
- 9 -
to TV-RGB.
www.i-Luv.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iluv

Table of Contents