Table of Contents
Advertisement
V10M10_IM_EN_02142008
OPERATIONAL INSTRUCTIONS
Using Your iPod
Before playing iPod, always connect the video to TV through composite video or S-Video, and
connect the audio through FR/FL analog audio output.
When unit is in iPod play mode, does not support component video output and 5.1 channel /
digital audio output.
Connecting your iPod to the dock:
1.
Connect you iPod to the dock, make
sure right dock adapter is installed
before docking your iPod into the
machine.
2.
Turn on the player, Select your iPod
using the remote control and press the
ENTER button or press the iPod button
on the unit.
Note: If your iPod is not inserted to dock, a "Please
insert iPod" message will display on screen.
After inserting your iPod and selecting iPod mode,
unit will verify your iPod and the "Initializing..."
message will appear on the screen.
Please wait until the process finishes. The unit cannot be operated during this time.
Music Menu:
Music menu is sorted by playlists, Artists, Albums, Songs, Genres, or Composers.
Use the NAVIGATION
control to confirm your selection.
When music is playing, information on the music
will be displayed on the TV screen.
Playing your iPod contents on TV:
When your iPod has been properly verified, the
following will be displayed: The supported menu and
screen may vary depending on the type of iPod
connected to the dock. Select the desired menu and
press the ENTER button on the remote control to view
the contents on your iPod, Selected the file and press
the ENTER button to play the selected music or video.
/
buttons to select a playlist and press ENTER on the remote
- 10 -
www.i-Luv.com
Advertisement
Table of Contents
