Material Type; Wood Screw - Viking DFUR1441CR Use And Installation Manual

Hinge adaptor screws -
Loosen these to adjust
door, on the top and
bottom of the door
Door must be
parallel to top and
sides of refrigerator
Figure 1
Note: or the door closer to work properly, it is necessary to maintain a minimum space of 9/32" (7mm) between the
door and cabinet flange as shown. This space can be adjusted by adjusting the top and bottom hinge adapters.
Top hinge pin -
Remove to remove
H
the door
9/32"
(7 mm)
W
1-23/32"
(38.8 cm)
Typical 4
Front of
Sides
overlay
panel
Figure 2
Glass Door Models

Material Type

#8 Wood Screw

Hardwood
3/32" (2.4 mm) Diameter. Pilot Hole
Softwood
5/64" (2.0 mm) Diameter. Pilot Hole
Table B
Model W H
14-5/16" 30-5/16"
15"
(36.4 cm) (76.9 cm)
23-7/16" 30-5/16"
24"
(59.5 cm) (76.9 cm)
Table A
Glass Door Models