GE JS968SFSS Installation Instructions Manual page 9

Self-cleaning radiant electric slide-in range
Hide thumbs Also See for JS968SFSS:
Table of Contents

Advertisement

Installation Instructions
Electrical Connections
4
3-WIRE POWER CORD
INSTALLATION
WARNING:
ground wire of the power cord must
be connected to the neutral terminal
located in the center of the terminal
block. The power leads must be
connected to the lower left and the
lower right terminals of the terminal
block.
A
Remove the 3 lower terminal screws
from the terminal block. Insert the 3
terminal screws through each power
cord terminal ring and into the lower
terminals of the terminal block. Be
certain that the center wire (white/
neutral) is connected to the center lower
position of the terminal block. Tighten
screws securely into the terminal block.
DO NOT remove the ground strap
connection.
Ground
plate
Power cord
B
Skip to Step 8 and proceed with the
installation.
The neutral or
Terminal block
(appearance
may vary)
Neutral
terminal
Ground
strap
cont.
5
4-WIRE POWER CORD
INSTALLATION
WARNING:
the supply circuit must be connected
to the neutral terminal located in the
lower center of the terminal block.
The power leads must be connected
to the lower left and the lower right
terminals of the terminal block. The
4th grounding lead must be connected
to the frame of the range with the
ground plate and the ground screw.
A
Remove the 3 lower terminal screws from
the terminal block. Remove the ground
screw and ground plate and retain them.
B
Cut and discard the ground strap. DO
NOT DISCARD ANY SCREWS.
C
Insert the one ground screw into the
power cord ground wire terminal ring,
through the ground plate and into the
frame of the range.
D
Insert the 3 terminal screws (removed
earlier) through each power cord
terminal ring and into the lower
terminals of the terminal block. Be
certain that the center wire (white/
neutral) is connected to the center lower
position of the terminal block. Tighten
screws securely into the terminal block.
Before
Terminal
block
Ground
strap
After
Terminal
block
Ground
screw
E
Skip to Step 8 and proceed with the
installation.
9
The neutral wire of
Ground strap
or
Neutral
terminal
Ground
plate
(grounding
to range)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jsp47Jsp57Js968

Table of Contents