Pre-Installation Checklist; Storage Drawer Removal - GE JS968SFSS Installation Instructions Manual

Installation Instructions

Pre-Installation Checklist

Door removal is not a requirement for
installation of the product, but is an
added convenience. To remove the door:
Open the oven door as far as it will go.
Push both hinge
locks down toward
the door frame,
to the unlocked
position. This may
require a flat blade
screwdriver.
DO NOT LIFT THE DOOR
BY THE HANDLE!
Place hands on both sides of
the door, and close the oven
door to the removal position.
This is half way between the
broil stop and fully closed.
Lift door up and
out until the
hinge arms
clear the slots.
NOTE: The oven door is very heavy.
Be sure you have a firm grip before lifting
the oven door off the hinges. Use caution
once the door is removed. Do not lay the
door on its handle. This could cause dents
or scratches.
Remove packing materials. Remove
labels on door, plastic on trim and panel,
and all tape around the range.
Hinge
Hinge
Unlocked Unlocked
Position
Position
Hinge
Hinge
Slot
Slot
Hinge
Hinge
Arm
Arm
Hinge Clears Slot

Storage Drawer Removal

Pull the drawer out until it stops.
Lift the front of the drawer until the
stops clear the guides.
Stop
Pull forward and remove the drawer.
4
cont.
Rail
Guide
Stop