Hd Receiver And Dolby® Digital Receiver Or Decoder - Toshiba DST-3000 Owner's Manual

HD Receiver and Dolby
Follow these steps indicated by the diagram below:
1) Connect an optical digital cable (not included) to the back of the HD receiver using the
connector marked DIGITAL AUDIO OUT. Connect the other end of this cable to the
optical input on the back of your Dolby Digital receiver or decoder.
2) Check the Owner's Guide for the Dolby Digital receiver or decoder for proper set-up and
operation.
Page 2-12
Toshiba DST-3000 High Definition Digital Receiver
®
Digital Receiver or Decoder