Table of Contents
Advertisement
Toshiba DST-3000 High Definition Digital Receiver
The Remote Control
The remote control uses an invisible infrared (IR) light to send
signals to your components when you press the keys. You must aim
the remote control toward the component for it to receive the
command.
The remote control can control your DST-3000 receiver and most
TV brands, as well as VCRs and many other auxiliary devices such
as cable boxes, amplifiers, and DVD players.
The mode keys across the top of the remote control enable you to
specify the device you intend to control. This is important since
many devices share the same keys, such as the
key and the
POWER
numeric keys. You must press the appropriate device key before
pressing a command key to make sure the remote control sends
the right signal to the right device. The only keys that deviate
from this rule are the 9 keys in the center section of the remote plus
the (
) key, as they are always associated with the DST-3000
EXIT
receiver.
For the DST-3000 receiver only, the four directional keys will cause
the on-screen highlight to move in the direction you want. The keys
will be referred to as , , , and .
L
L
The select key (
) is one of the most important keys. Pressing
SELECT
the
key will tell the DST-3000 receiver that you wish to
SELECT
choose the highlighted item.
The arch of keys above the directional keys control frequently used
functions. These include menu (
), program information
MENU
The remote control
(
), favorite lists (
), and program guide (
) keys.
INFO
FAV
GUIDE
Pressing the
key displays the action icon in the upper left
ACTION
corner of your screen for a few seconds. During this time, you can press other keys to access
special functions indicated in blue above the keys. Refer to the chart on the next page for a list of
key functions.
ACTION
Page 1-6
Advertisement
Table of Contents
