Table of Contents
Advertisement
1 . 2 F E A T U R E S
The following information is a summary of your ADL 600's features:
All Tube, Dual Transformer Microphone Pre-Amplifier. Your ADL 600 is
a discrete Class A high voltage all tube, dual-transformer microphone
preamplifier designed for high gain (+73dB), high headroom (+30dB), low
noise (-100dB S/N ratio) and ultimate sonic performance – great for all types
of recording applications.
•
Microphone Input / Instrument Input / Line Input. Three different
types of inputs are provided on the ADL 600 for maximum flexibility. You
can connect microphones, instruments, keyboards as well as run your
entire mix through the ADL 600 during mix-down or mastering for signal
conditioning.
•
Variable Microphone Input Impedance. This feature enables you to
"tune" your microphone – experiment with different input impedances to
create different sounds from your microphones. Changing the input
impedance can be the perfect solution for a given recording application.
•
+48 Volt Phantom Power. The ADL 600 has +48V phantom power
available. This assures optimum performance of your condenser
microphones that require phantom power.
•
-20dB PAD. A -20dB pad is available for reducing the in-coming signal
level. This pad provides a more manageable signal from high output
devices or extremely loud sources (drums) giving greater control over
the in-coming signal to avoid clipping or distortion during recording.
•
Polarity Invert. Use the phase invert switch to combat phase
cancellation with other open microphones.
•
Hi-Pass Filter. To reduce unwanted low-frequency boom, or room
rumble.
•
VU Meter. The analog VU meter provides an accurate reading of the
output level.
•
LED Metering. Eight segment LED meters for detecting peaks and fast
transients of the output level.
5
OVERVIEW
Advertisement
Table of Contents
