Power Jack; Stereo Operation - Alesis M-EQ 230 User Manual

POWER JACK

Accepts the +9VAC power from the M-EQ 230 Power Supply.
This external supply keeps hum, noise, and ground loops to a
minimum.
SECTION 2
SET-UP
INSTRUMENTS, MICROPHONES
The A lesis M-EQ 230 has high impedance inputs that are
ideally suited for use either with instruments or line level signals.
Although microphones can be connected directly into the M-EQ
230 , it is recommended that for quietest operation they be
connected to a mixing console first and then connected to the M-
EQ 230 as described in Figure 1 .

STEREO OPERATION

For stereo operation of the M-EQ 230 , connect the left and right
line outputs of the device to be equalized into the left and right
inputs of the M-EQ 230. See Figure 1
FIGURE 1
M-EQ 230 STEREO OPERATION
Alesis 1622
MIXING
CONSOLE
MAIN OUT
LEFT
LEFT INPUT
STEREO
POWER AMP
MAIN OUT
RIGHT
LEFT RIGHT
I N P U T I N P U T
M-EQ 230
LEFT RIGHT
OUTPUT OUTPUT
RIGHT INPUT
4