Table of Contents
Advertisement
Adjusting the picture
Switching the picture mode
The user can switch to the desired picture mode suitable for the image source and the environment in which this
projector is used.
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
SECURITY
:MENU SELECT
ENTER:SUB MENU
PICTURE
PICTURE MODE
COLOR
TINT
COLOR TEMP.
GAMMA
CONTRAST
BRIGHT
SHARPNESS
NOISE REDUCTION
DYNAMIC IRIS
:MENU SELECT
:CHANGE ENTER:REGISTER
PICTURE MODE
DYNAMIC
50
30
DEFAULT
2.2
32
32
6
2
1
DYNAMIC
GRAPHIC
USER
STANDARD
CINEMA
NATURAL
Press the "MENU" button.
The MAIN MENU screen will be displayed.
Select "PICTURE" with the
buttons.
Press the "ENTER" button.
The PICTURE screen will be displayed.
Select "PICTURE MODE" with the
buttons.
Switch "PICTURE MODE" with the
buttons.
DYNAMIC: The picture becomes suitable for the
use in well-lighted areas.
GRAPHIC: The picture becomes suitable for input
from to the personal computer.
USER: The COLOUR TEMP. and GAMMA settings
can be adjusted.
STANDARD: The picture becomes suitable for
moving images in general.
CINEMA: The picture becomes suitable for movie
sources.
NATURAL: The picture complies with sRGB.
• Factory defaults are "GRAPHIC" for RGB system and
"STANDARD" for moving images.
• When the "ENTER" button is pressed while
"PICTURE MODE" has been selected, the picture
mode which has been selected can be saved and
used as the presetting when new signals are input.
COLOUR TEMP. and GAMMA settings are saved.
45
Advertisement
Table of Contents
