Epson BrightLink 475Wi Operation Manual page 29

Monitoring window layout
The icon patterns and their meanings are explained below.
A
Type
Shows the group or projector status.
No warnings or problems
Warning or problem
An error has occurred on the projector.
Notification
The projector requires immediate attention.
Monitoring disabled
The projector is not being monitored. If you right-click the icon
and select Monitoring enabled, the projector will be added to
the projectors that are being monitored.
Data being updated
Network error (Monitor Password authentication error)
No Monitor Password was entered when the projector was
registered, or an incorrect Monitor Password was entered.
s p.12, p.15, p.16
Network error (TCP connection error)
Network error (ESC/VP.net communication error)
B
Display name
Shows the display name.
C
Power
Shows the power on status for the projector.
Power on and normal status
Power on and abnormal
status
D
Lamp Hours
Shows the lamp operating time for the projector.
E
Source
*1
*2
*3
Power off and normal status
Power off and abnormal
status
Shows the input source that has been selected for the projector.
Computer or
Computer1
BNC
Video (RCA)
SDI
DVI-D1 or HDMI1,
*4
DVI-D, HDMI
D-Video
USB Display
USB2
F
Temperature level
The following five icons display the differing internal temperature
status of the projector.
Internal temperature
normal
High-temperature
warning
Internal temperature
error
G
Error information
Shows a warning/problem status using the following icons.
*6
Replace Lamp
29
Computer2
S-Video
Video (BNC)
DisplayPort
*5
DVI-D2 or HDMI2
EasyMP
USB or USB1
LAN
Internal temperature
normal
High-temperature
warning
Replace Lamp (Lamp 1)