Epson BrightLink 475Wi Operation Manual page 41

An e-mail notifying the operator of a problem/warning/status is issued
The details contained in the e-mail message can consist of the following.
Message
Easy Interactive Stop using the projector, disconnect the power
Function Error cable from the electrical outlet, and contact Epson.
See your User's Guide for more information.
Internal Error
Fan error
Sensor error
Lamp Cover Open See your User's Guide for more information.
Lamp failure at power
*
on
*
Lamp Error
Supply System Error Stop using the projector, disconnect the power
*
(Ballast) cable from the electrical outlet, and contact Epson.
See your User's Guide for more information
High internal
temperature error
Low air flow error
Air filter air flow
sensor error
Cinema filter error
Shutter error
Cooling system error
(Peltier element)
Cooling system error
(pump)
Remedy
Message
High-temperature See your User's Guide for more information.
warning
*
Replace Lamp
*
Lamp error
Lamp failure at power
*
on
Supply System Error
*
(Ballast)
Replace Air Filter
No Air Filter
Low Air Flow
Air Flow Sensor Err.
Cinema filter warning
Shutter warning
Clean Air Filter Notice
Exhaust vent shutter
error
Obstacle Detection
Error
Obstacle Detection
Warning
Low air flow error
High internal
temperature error
Other warning
Other error
41
Remedy