Samsung HL-S5666W Owner's Instructions Manual page 27

Zi . ...
6
Press the ENTER button to start the auto
program. By default, the cable TV system
is set to "STD'.
If you want to select another type of
cable system, press the _1 button and
use the • or • button to select
"STD', "HRC" or "IRC'.
Press the ENTER button.
Selects a cable signal type for your
location•
• STD, HRC, and IRC identify various
types of cable TV systems. Contact
your local cable company to identify
the type of cable system that exists in
your particular area. At this point the
signal source has been selected.
The TV will begin memorizing all of the
available channels.
After all the available channels are
stored, the Auto program menu
reappears. Press the ENTER button at
any time to interrupt the memorization
process.
Press the ENTER button, then the menu
to set the clock mode is automatically
displayed.
Press the ENTER button to select "Clock
Mode".
Press the • or • button to select "Auto"
or "Manual", then press the ENTER
button.
Sets the current time manually or automatically.
Clock Mode
Continued...
English- 27