Connecting To Dvi (Digitalvisual Interface); Connecting A Digital Audio System - Samsung HL-S5666W Owner's Instructions Manual

Connecting to DVI (DigitalVisual Interface)
Connect a set of audio
cables between the DVI
AUDIO (L, R) IN jacks on the
TV and the AUDIO OUT
jacks on the Set-Top Box.
,SL
Connect an HDMI/DVI cable
between the HDMI 2/DVI IN
jack on the TV and the DVI
OUT jack on the Set-Top Box.
NOTES
• Make sure the DVI source's
power is on, or you will be
unable to select it in the
TV menu's source list.
• The HDMI/DVI IN jack is not
compatible with PC.
Incoming
CaBle or
Antenna
TV Rear Panel
DTV Set-Top Box
Connecting a Digital Audio S ystem
There are many types of digital audio systems on the market today.
A simplified illustration of an audio system is shown below.
For more information, see your audio system owner's manual.
If your audio system has an
optical digital audio input,
connect to the DIGITAL
AUDIO OUT (OPTICAL) jack
on the TV.
NOTE
• OPTICAL: converts the electric
signal into an optical light
signal, and transmits it through
glass fibers.
• When a Digital audio system is
connected to the Digital Audio
Out (Optical) terminal:
Decrease the gain (volume) of
the TV,,and adjust the volume
level with the audio system's
volume control.
TVRear Panel
iB
Audio System
English- 23