Configuring The Cisco 2851 - Cisco SIEMENS HICOM 330E Application Note

Siemens hipath 4000 release 1 and siemens hicom 330e release 3.1 to cisco ios voice gateway using e1 qsig with h.323
Table of Contents

Advertisement

Configuring the Cisco 2851

2851_West#sho ver
Cisco IOS Software, 2800 Software (C2800NM-IPVOICE-M), Version 12.4(1.8)T, INTER
IM SOFTWARE
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Fri 06-May-05 00:27 by kellmill
ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)
2851_West uptime is 5 days, 6 hours, 46 minutes
System returned to ROM by reload at 18:21:06 UTC Thu Jun 9 2005
System image file is "flash:c2800nm-ipvoice-mz.124-1.8.T"
Cisco 2851 (revision 53.51) with 249856K/12288K bytes of memory.
Processor board ID FHK0847F03W
2 Gigabit Ethernet interfaces
31 Serial interfaces
2 Channelized E1/PRI ports
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62592K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
© 2007 Cisco Systems, Inc. All right reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com
Page 33 of 41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents