Directed Electronics G436S 5220XS Owner's Manual page 31

Directed electronics, inc. vehicle alarm owner's guide
Table of Contents

Advertisement

If the system has entered the triggered sequence (siren has begun
chirping), pressing the disarm button of the transmitter will not
disarm VRS
. To disarm the VRS
®
sequence:
1. Turn the ignition on.
2. Press the Valet switch the pre-
programmed number of times to
disarm the VRS system.
note: If the VRS® system has begun its chirping
sequence, the ignition must be turned off, then on to dis-
arm. If you are driving the vehicle at the time, pull to a
safe place away from traffic and follow the triggered
sequence disarm procedure.
g g l l o o s s s s a a r r y y o o f f t t e e r r m m s s
The "brain" of your system. Usually hidden under
Control Unit:
the dash area of the vehicle. It houses the microprocessor which
monitors your vehicle and controls all of the system's
functions.
: An automatic switch controlled by the secu-
Fail Safe Starter Kill
rity system which prevents the vehicle's starter from cranking
whenever the system is armed. The vehicle is never prevented
from cranking when the system is disarmed, in Valet mode, or
should the starter interrupt switch itself fail. Your system is ready
for this feature, however installation may require additional
labor.
28
during a VRS
trigger
®
®
DRW-35
© 2002 directed electronics, inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

5200xs

Table of Contents