Calibrate The Scanner - Visioneer STROBE XP 300 User Manual

Your computer recognizes that a scanner has been plugged into the
USB port and automatically configures its driver database with the
appropriate software to run the scanner.
C S
ALIBRATE THE CANNER
1. The Calibration window opens.
2. Follow the instructions in the calibration window for completing
this process.
To calibrate the scanner:
1. Close the scanner's back panel so the calibration paper will feed
straight through the scanner.
2. Insert the calibration page into the page feed.
The scanner grabs the paper and feeds it through the scanner.
The scanner will automatically pass the sheet back and forth several
times.
Do not remove the sheet until calibration is finished.
3. When calibration is complete, the calibration paper will back out of
the scanner.
S 2: C C
TEP ONNECT AND
S
ALIBRATE THE CANNER
13