Visioneer PATRIOT 680 SCANNER User Manual page 86

3. From the Paper Source drop-down list, choose Document Feeder to scan
from the Automatic Document Feeder, or Flatbed to scan from the
Flatbed glass.
If you are scanning from the Automatic Document Feeder, select a paper
size from the Page Size list.
If you are scanning from the Flatbed glass, you can change the size of the
scanned image after seeing a preview.
4. Click Preview to preview the image before scanning, the image is
displayed on the right side of the window.
Note: If you preview when scanning a stack of documents, the first page of
the stack feeds through the ADF for the preview. After adjusting the scanner
settings, replace that page on the stack so it is scanned with the rest of the
pages.
5. Adjust settings of the previewed image as desired.
If you're scanning from the Flatbed, change the size of the scanned image.
To do this, click and hold the mouse pointer over one of the four sizing-
boxes on the corners of the previewed image. Then drag the box to
increase or decrease the size of the image.
6. Preview the image again. When you are satisfied with the image, click the
Scan
button.
7. The scanned images will appear in Microsoft Paint (or other WIA
application you're using).
T T TWAIN I
HE WO NTERFACE
O 81
PTIONS