Table of Contents
Advertisement
Step 13
Step 14
Installing STRM
Using Red Hat
Enterprise 4.6
Step 1
Step 2
Step 3
To configure the STRM root password:
Enter your password.
a
Use the TAB key to move to the Next option. Press Enter.
b
The Confirm New Root Password window appears.
Re-enter your new password to confirm.
c
Use the TAB key to move to the Finish option. Press Enter.
d
A series of messages appear as STRM continues with the installation. This
process typically takes several minutes. The Configuration is Complete window
appears.
Press Enter to select OK.
You are now ready to access STRM. For more information, see
To install STRM when using Red Hat Enterprise 4 Update 6 on your own
hardware:
Note: For information on setting up Red Hat Enterprise for use with STRM, see
Appendix A Setting Up Red Hat
Install all necessary hardware.
Install Red Hat Enterprise. See
Obtain the STRM software and copy to a CD.
Note: To download the software from the Qmmunity web site, see
https://support@juniper.net/. For access to the Qmmunity web site, please contact
Customer Support.
STRM Installation Guide
Installing STRM Using Red Hat Enterprise 4.6
Enterprise.
Setting Up Red Hat
Enterprise.
15
Accessing
STRM.
Advertisement
Table of Contents
