Disarming Without A Transmitter; Valet Mode; Auxiliary Function - Directed Electronics Viper 220MAX Owner's Manual

Directed electronics vehicle security system owner's guide

Table of Contents

Disarming without a transmitter

This feature allows you to disarm the security system without the remote

transmitter should it be lost, damaged or disabled. In order to disarm the

system without the transmitter, you must have the vehicle's ignition key and

know where the Valet button is located.

To disarm the security system, turn the ignition to the "ON" position. Press

the Valet button the preset number of times (one to five times) within 15

seconds. After 5 seconds, the system will now disarm. If the system does not

disarm, you may have waited too long; turn the ignition "OFF" and "ON" and

try again

Location of the Valet button : ______________________________

Number of pulses : _______________________

You can prevent your security system from automatically arming and trig-

gered by using the Valet Mode. This is very useful when washing the

recreationnal vehicle or having it serviced. In Valet mode, the security system

will not arm, even with the remote transmitter.

To enter or exit Valet mode :

You are now in Valet mode , to exit Valet mode repeat step 1 thru 3 again.

Press on buttons

optionnal 508 D Microwave perimeter sensor.

1. Turn the ignition "ON"

2. Turn the ignition "OFF"

3. Press and release the Valet button within 10 seconds.

and

together for 2.5 seconds, this will activate

2002 Directed Electronics, (Canada). Inc.

Table of Contents