Hitachi 50VX915 - LCD Projection TV Operating Manual page 79

SETUP
Upgrades
It shows software information and easy upgrade procedure. This function allows the TV software to be
upgraded by using a flash card (MMC Card). If a future software upgrade is required for your TV, Hitachi will
notify and provide you with a flash card. In order to receive written notification and the flash card, please
complete and return the warranty card.
Setup
CableCARD Info
Set AV Control
Upgrades
Set Stand-By Mode
Move Select
SEL
Insert MMC card, then press the CURSOR PAD
upgrading.
NOTE:
Any power interruption during the upgrade process will cancel the upgrade. When this happens, repeat the upgrade
procedure.
Set Stand-By Mode
This function sets the IEEE1394 in Stand-By Mode to ON or OFF. Certain digital devices have a power save
feature, in which the device automatically powers OFF when not in use (sleep mode). Only by setting the
IEEE1394 function in Stand-By mode to ON, will the TV be able to control a device that is in sleep mode.
Setup
CableCARD Info.
Set AV Control
Upgrades
Set Stand-By Mode
Move Return
SEL
NOTE:
By turning ON the IEEE1394 function, your TV set will no longer be set for power saving Stand-By mode. The IEEE1394
Stand-By function must be set to OFF to return your TV set to the power saving Stand-By mode.
, to highlight "Upgrade Now". Press the SELECT button to select and start
Setup
79
Setup
Upgrades
Software Version #: Main VXXXX.XXXX
1394 VXXXX.03
MMC Software Upgrade
Upgrade Now
Please insert MMC card
before upgrading.
Move Return
SEL
Set Stand-By Mode
If you want to use the IEEE1394
function in the Stand-By, please
set the IEEE1394 Stand-By mode.
IEEE1394 Stand-By
Move Return
SEL