Hitachi 50VX915 - LCD Projection TV Operating Manual page 28

POWER button
Press this button to turn the TV set on or off when the remote is in TV mode. (See page 27 for instructions on how to set the remote
control to TV mode.)
MODE Indicator
Turns on or blinks to show remote control mode.
SOURCE ACCESS ( , ) buttons
Press these buttons to select remote control mode.
SOURCE ACCESS (ENT) button
Hold down this button while entering your device code to program the remote (see pages 42-50). You can also use this button in
an optional Input access feature (see page 47).
PAUSE button
Press the PAUSE button to freeze the picture. Press the EXIT button to return the picture to motion. Press the PAUSE button
repeatedly to cycle through the three different freeze modes (see page 41).
Freeze
HOW TO USE THE REMOTE TO
CONTROL YOUR LCD REAR PTV
A/V NET
GUIDE
Freeze
28
Freeze
Freeze
Freeze