Hitachi 50VX915 - LCD Projection TV Operating Manual page 61

ASPECT
Aspect
Use this function to select the Picture Format Aspect Ratio.
Auto Aspect
Automatically adjust the Aspect Ratio depending on the input signal to fill the screen.
Press THE CURSOR PAD
Press THE SELECT button to select. A " " in the box indicates that the feature is ON.
NOTES:
1. The Auto Aspect function is recommended on an input signal with VIDEO ID.
2. The Auto Aspect function is best used on composite video, S-Video, 480i and 480p component signals.
3. See page 29 for Aspect Mode availability.
Vertical Position
This function allows you to select when aspect style is either 4:3 EXPANDED/ZOOM1/ZOOM2 or 16:9 ZOOM. Vertical position can be
changed with these modes. For example, it will be useful for centering the picture area at both the top and bottom of the picture with
480i/480P signal. Adjustable range is -10 (video center is toward bottom of screen) to +10 (video center is toward top of screen).
Press the CURSOR PAD ,
Press the CURSOR PAD
Press EXIT to quit the MENU, or select Aspect to return to the main menu.
NOTE: Vertical Position will not be available in 4:3 Standard and 16:9 Standard modes.
Video
Audio
Aspect
Chan. Manager
Locks
Timers
Setup
Move Sel.
SEL
, , , to select menu item.
, to select menu item.
or to adjust the function.
Aspect
Mode
16:9 Standard
4:3 Standard
4:3 Zoom1
Auto Aspect
Vertical Position
Move
61
16:9 Zoom
4:3 Expanded
4:3 Zoom2
0
Return
SEL