Hitachi 50VX915 - LCD Projection TV Operating Manual page 29

HOW TO USE THE REMOTE TO
CONTROL YOUR LCD REAR PTV
ASPECT button
Press this button to quickly change the picture format ASPECT ratio.
Depending on the input signal format received, the picture format ratio allows you to adjust the images through the following options.
4:3 STANDARD
4:3 EXPANDED
4:3 Zoom1/Zoom2
16:9 STANDARD
16:9 Zoom
(1) NTSC/480i/480P Input
4:3
INPUT
(2) 480i/480P Input
16:9
INPUT
(3) HDMI/720P/1080i Input
16:9
INPUT
NOTES:
1. The Aspect Style setting you select for an ANT input will automatically be set for the other ANT inputs. However, all
five video inputs have independent Aspect Style settings.
2. Vertical position adjustments are directly available when you choose 4:3 EXPANDED/ZOOM1/ZOOM2 or 16:9
ZOOM aspect style (see also page 61).
Use this aspect mode to display conventional (4:3) images. Side panels (gray areas) are placed to the
left and right of the image to preserve the original aspect ratio of the source.
Use this aspect mode to display conventional (4:3) sources by linearly increasing image expansion from
the center towards the edges of the display area in order to fill it.
Use these aspect modes to zoom in on conventional (4:3) sources.
Use this aspect mode to display 16:9 sources like HDTV and DVD's preserving the original 16:9 aspect
ratio.
Use this aspect to Zoom-in once while in 16:9 aspect.
4:3 STANDARD 4:3 EXPANDED
16:9 ZOOM 16:9 STANDARD
4:3 STANDARD 4:3 EXPANDED
16:9 ZOOM 16:9 STANDARD
16:9 STANDARD 16:9 ZOOM
4:3 ZOOM1
4:3 ZOOM2
4:3 ZOOM1
4:3 ZOOM2
4:3 EXPANDED
29