Channel Search - Zenith Z50P3 Installation And Operating Manual

MFL34797058-en-simple 11/6/07 4:52 PM Page 22
WATCHING TV
N
-1-
Z
<
CHANNEL SEARCH
Auto Scan (Auto Tuning)
Automatically finds all channels available through antenna
or cable inputs, and stores them in memory on the channel
list.
Run Auto Tuning again after any Antenna/Cable connection
changes.
A password is required to gain access to Auto Tuning menu
if the Lock System is turned on.
Press the MENU button and then use • or • button
to select the SETUP menu.
Press the • button and then use • or • button to
select Auto Tuning.
Press the ENTER button to begin the channel search.
Allow Auto Tuning to complete the channel search
cycle for ANTENNA and CABLE.
22
'<:::3
@
@
@