Setup Menu Options; Ez Scan (Channel Search); Manual Scan - Zenith Z42PX1D Installation And Operating Manual

Setup Menu Options

Setup Menu Options

EZ Scan (Channel Search)

EZ Scan (Channel Search)
- Automatically finds all available channels through antenna or cable inputs, and stores them in memory on the channel list.
- Run EZ Scan again after any Antenna/Cable connection changes.
- A password is required to gain access to EZ Scan menu if the Lock System is turned on.
1. Press the MENU button and then use
2. Press the G G button and then use
3. Press the ENTER button to begin the channel search.
Allow EZ Scan to complete the channel search cycle for ANTENNA, and CABLE.

Manual Scan

Manual Scan
- A password is required to gain access to Manual Scan menu if the Lock System is turned on.
1. Press the MENU button and then use
2. Press the button and then use
G G
3. Press the G G button and then use
CADTV.
4. Press the button and then use
G G
want to add or delete.
5. Press the ENTER button to add or delete for the channel number.
6. Press EXIT button to return to TV viewing or press MENU button to return to
the previous menu.
Notes:
• This channel number is a physical channel number, which is different from the normal channel number shown in Channel
Edit.
• TV: analog antenna(over-the-air) TV signal
DTV: digital antenna(over-the-air) TV signal
CATV: analog cable TV signal
CADTV: digital cable TV signal
button to select the
D D / E E
button to select
D D / E E
button to select the
D D / E E
button to select
D D / E E
button to select TV, DTV, CATV, and
D D / E E
button to select channel number you
D D / E E
menu.
.
menu.
.
Operation
Operating Guide 23