Setup Steps
Step 1.
Attach Horizontal Supports (C and D) to the
Left and Right Wall Angle Module ( A and
B) with screws (E).
Step 2.
Install the Wall Mount Bracket onto the wall.
Note:
The screws in this package is for mounting
onto a wooden wall. Different kind of walls
(like a cement wall) need different type
screws. Please consult with a qualified
installer to make sure your wall is capable of
supporting this bracket and plasma monitor.
You can adjust the mounting direction and
inclination angle (0, 5, 10, 15 degrees) by
adjusting the screws position on the Wall
Mounting Angle Module.
33
ViewSonic VPW425