CONNECTING THE MONITOR
Connecting a DVD Player
Using Component Video Input
1. Connect the green-colored (labeled as "Y") jack from
the DVD to the green-colored"Y1" jack of the monitor.
2. Connect the red-colored (labed as "P
from the DVD to the red-colored "P
monitor.
3. Connect the blue-colored (labed as "P
from the DVD to the blue-colored "P
the monitor.
4. Connect the red (R) and white (L) audio jacks from the
DVD to the R and L audio-in jacks located next to the
"P
1/C
1" connector.
R
R
Using S-Video Input
1. Connect the S-Video (4-pin DIN) connector from the
DVD to the "S-VIDEO 1" input on the back of monitor.
2. Connect the red (R) and white (L) audio jacks from the
DVD to the R and L audio-in jacks located next to the
S-VIDEO 1 connector.
Using Composite (AV) Video Input
1. Connect the "yellow"(video) connector from the DVD
to the yellow "VIDEO 1" input on the back of monitor.
2. Connect the red (R) and white (L) audio jacks from the
DVD to the R and L audio-in jacks located next to the
"yellow" VIDEO 1 connector.
6
ViewSonic VPW425
"or "C
") jack
R
R
1/C
1" jack of the
R
R
Note:
"or "C
") jack
B
B
1/C
1" jack of
B
B
There are two sets of
component inputs
provided. You can use
either set of component
inputs to connect your
DVD.