Juniper JUNOSE 11.1.0 - REV 4-29-2010 Manual page 81

Table 3: Link Layer Maximums (continued)
Feature
HDLC interfaces per chassis
HDLC interfaces per line module
COCX-F3
cOCx/STMx F0
CT3/T3 F0
OCx/STMx/DS-3 ATM
OCx/STMx POS
OC48 (ERX1440 router only)
MLFR bundles per chassis
MLFR bundles per line module
MLPPP bundles per chassis
MLPPP bundles per line module
PPP interfaces per chassis
(See Note 1 on page 70.)
PPP interfaces per line module
COCX-F3
cOCx/STMx FO
GE/FE
GE-2
GE-HDE
OCx/STMx/DS-3 ATM
OC3/STM-1 GE/FE
OCx/STMx POS
OC48 (ERX1440 router only)
ERX705 and
ERX310 ERX710
4000 10,000
12 12
2000 2000
1992 1992
8000 8000
4 4
– –
5000 5000
Bundles per line module are limited only by the
availability of interface columns on the module.
Because a bundle requires at least one interface
column, the number of bundles cannot exceed the
number of interface columns.
12,000 12,000
The maximum number of MLPPP bundles supported per line
module is the lesser of the maximum number of MLPPP bundles
supported per chassis or of the maximum number of interfaces
supported on the line module. For more information, see the
JUNOSe Link Layer Configuration Guide.
16,000 32,000
12 12
2000 2000
8000 8000
8000 –
8000 –
8000 8000
8000 8000
4 4
– –
ERX310, ERX7xx, and ERX14xx System Maximums
Appendix A: System Maximums
ERX1410 ERX1440
24,000 24,000
12 12
2000 2000
1992 1992
8000 8000
4 4
– 1
5000 5000
12,000 12,000
32,000 48,000
12 12
2000 2000
8000 8000
– 8000
– 8000
8000 8000
8000 8000
4 4
– 1
73