Juniper JUNOSE 11.1.0 - REV 4-29-2010 Manual page 33

Deprecated Command
nrzi-encoding
no ospf enable
policy-list
radius disconnect client
rate-limit-profile
remote-loopback
show controllers t1/e1
show controllers t1 remote
show ike certificates
show ike configuration
show ike identity
show ike policy-rule
show ike sa
show ip dhcp-external binding
show ip dhcp-external binding-id
show ip dhcp-local binding
show ip dynamic-interface-prefix
show ip mirror interface
show license l2tp-session
t1 lineCoding
traffic-class
tunnel mpls label-dist
tunnel mpls autoroute announce
bgp
unframed
user-packet-class
virtual-router
yellow
Command Mode Preferred Command
Interface Configuration
Router Configuration ospf shutdown
Global Configuration ip policy-list
Global Configuration subscriber disconnect
The RADIUS Disconnect
Configuration mode has
been removed from the CLI.
Policy List Configuration rate-limit-profile in Classifier
Group Configuration mode
Controller Configuration
User Exec, Privileged Exec
User Exec, Privileged Exec
User Exec, Privileged Exec show ipsec certificates
User Exec, Privileged Exec show ipsec ike-configuration
User Exec, Privileged Exec show ipsec identity
User Exec, Privileged Exec show ipsec ike-policy-rule
User Exec, Privileged Exec show ipsec ike-sa
Privileged Exec show dhcp binding
Privileged Exec show dhcp binding
Privileged Exec show dhcp binding
Privileged Exec, User Exec None
Privileged Exec show secure policy-list
User Exec, Privileged Exec None
Controller Configuration None. This command never
had any effect.
Policy List Configuration traffic-class in Classifier
Group Configuration mode
Interface Configuration, None
Tunnel Profile Configuration
Interface Configuration, None
Tunnel Profile Configuration
Controller Configuration
Policy List Configuration user-packet-class in
Classifier Group
Configuration mode
Domain Map Configuration router-name
Still available in Privileged
Exec and Global
Configuration modes
Controller Configuration
Release 11.1.0
25
Known Behavior