OneTouch ULTRASMART Quick Reference Manual

STEP 4
Coding the Meter
Code the meter before using it for the first time and every time
Scroll up or down with Arrow button
you change to another vial of OneTouch ® Ultra ® Test Strips.
Meter is ready for testing.
CAUTION: Matching the code on the meter and the code on
the test strip vial is essential to obtain accurate results. Each
(Example)
time you test, check to make sure the code numbers match.
STEP 1

Enter Code Mode.

Note: Before testing, wash hands with warm, soapy
Insert test strip to turn on meter.
water. Rinse and dry thoroughly.
"OneTouch UltraSmart" will appear,
followed by code number.
STEP 1
STEP 2

See Code Number.

Push it all the way in until it will go no
Code number will appear on display.
further. Meter turns on automatically.
(Example)
STEP 3
Match Code Numbers.
Compare code number on meter display
with code number on test strip vial. If
matching, begin testing. If not matching,
see Step 4.
(Example)

Code Meter.

STEP 2

Select Test Mode.

Apply Blood
.
Use Arrow button to select
"Apply Blood" for fingertip sample
or "Alternate Site" for forearm and
palm samples. Do Not select Control
Solution mode when testing blood.
Alternate Site
Failure to select correct test mode

Test Summary

may cause blood glucose averages
to be incorrect.

Insert Test Strip.

STEP 3

Apply Sample.

Touch and hold drop of blood to
the narrow channel in the top
edge of the test strip.
STEP 4

Fill Confirmation Window.

Display Symbols and Messages

Be sure confirmation window is full
before meter counts down. If window
Code
1) New meter not coded. Code meter; or
is not full before meter begins
---
2) Meter lost power briefly and
countdown, repeat test with new
entered Set-up mode. Reset code
test strip. Do Not add more blood to
number.
the test strip; discard the test strip Check Code
and retest.
23.0
Sep 8-02 8:30 am
Test result with suggestion to check
ketone levels.
m mol/L
Sep 8-02 8:30 am STEP 5
heck Ketones
.8
omment? Press OK

Accurate Results in Just 5 Seconds.

(Example)
mmol/L
WARNING: If mmol/L does not appear
Sep 8-02 8:30 am
.9
(Example) with the test result, call the OneTouch ®
Customer Care Line at 1 800 663-5521. Test result is from 1.1 through 3.3
mmol/L mmol/L with meal or snack reminder.
Do you need a snack?
Comment? Press OK
(Example)
WARNING
OW
Blood glucose level lower than
1.1 mmol/L.
G UCOSE
Below 1.1 mmol/L
Need help?
WARNING
IG
Very high blood glucose level
Call the OneTouch ® Customer Care Line at
GLUCOSE
exceeding 33.3 mmol/L.
1 800 663-5521
Above 33.3 mmol/L
Visit us at www.OneTouch.ca
There may be a problem with meter.
1) Turn off meter. Enter Set-up mode.
Reset meter before testing; or
WARNING
2) Turn off meter. Enter Set-up mode.
Error 1
Reset language, date, time and
meter code.
Call customer service
If Error 1 message continues, Do Not
See Owner's Booklet
use the meter. Call the OneTouch ®
Customer Care Line at 1 800 663-5521
for a replacement meter.
WARNING
Used test strip inserted or problem
Error 2
Meter or strip problem with meter. Repeat test with new test
Please repeat test strip.
See Owner's Booklet
©2006 LifeScan,Inc. Milpitas, CA 95035 U.S.A.
Blood or control solution sample
WARNING Rev. date: 08/2006 AW 06139403A
applied before "Apply Blood",
Error 3
"Alternate Site", or "Control Solution"
Meter not ready
Please repeat test appeared on display. Repeat test with
AW 06139403A
See Owner's Booklet new test strip.