FARONICS DEEP FREEZE ENTERPRISE Manual page 54

|
54 Using Deep Freeze Enterprise Console
Deep Freeze Enterprise User Guide
The two tabs on the Configuration Screen can be used to update the configuration on remote
computers. Close the Configuration Screen after making the necessary changes in configuration.
For further information about the options on each tab, refer to
Administrator.
The following message is displayed:
3. Click OK.
4. In the Workstations pane, select the required computer(s) to be dynamically updated with the
new configuration settings.
5. Click Send on the menu bar to send the new configuration settings to the selected
computer(s). The following message is displayed.
6. After sending the new configuration settings to the selected computers, the following options
are available:
— Click Save As to save the current settings of the Configuration Screen to a file. A standard
Save File dialog displays where a location and file name can be specified.
— Click Edit at any time to re-open the Configuration Screen with the current settings intact.
— Click Close to clear the contents of the Configuration Screen and exit out of the dynamic
configuration mode.
When updating the configuration on the computer, the Embedded Events and
Maintenance tab options are updated with the new settings.
Using Deep Freeze Configuration