Shutdown - FARONICS DEEP FREEZE ENTERPRISE Manual

Example
In the above screen, an Embedded Event has been created to restart the computer daily at 12:00
AM. The Embedded Event is configured to display a message to the user 1 minute before the
Restart event.

Shutdown

The Shutdown event can be scheduled by completing the following steps:
Select Shutdown from the Event Type drop-down in the Event Management pane and click Add.
The following options are displayed in the Event Properties pane:
• Event Name - Specify a name for the event.
• Day - Select the day, or specify if the event will occur on Weekdays or Weekends.
• Start Time - Select the Start Time.
• Allow User to Cancel Event - Select the check box if the user is allowed to cancel the event.
• Show message - Select the check box to display a message on the computer before the event
occurs. Specify the time interval in minutes and enter a brief message to be displayed before
the event occurs.
The message This computer will reboot in %d seconds is displayed in the Message
to be displayed before the Event field. This message can be edited. Add the word
minutes in the message after %d to include the word minutes as part of the
message.
Embedded Events Tab
Deep Freeze Enterprise User Guide
|
33