Table of Contents
Advertisement
Installing the New Configuration Administrator and Enterprise Console
Complete the following steps to install a new version of the Configuration Administrator on the
administrator computer.
1. Double-click the file DF65Ent.exe to begin the installation process.
2. Follow the steps presented. Read and accept the license agreement.
3. Enter the License Key in the License Key field.
4. Click Install and the Configuration Administrator and Enterprise Console are installed on
the computer
5. Once installation is completed, the workstation will prompt for the end user to enter a
Customization Code. Enter the same Customization Code used for the previously installed
copy of Deep Freeze.
Clicking OK will display a confirmation of the Customization Code assigned in plain text
and will provide an option to print for future reference.
If the Customization Code is not entered correctly it can be re-entered using the DFInit.exe
application located in:
(for 6.5 and higher) <DRIVE>:\Program Files\Faronics\Deep Freeze 65 Enterprise\Install
Programs
However, none of the previously installed workstations will be controllable until the
Customization Code is correct.
The Customization Code must be recorded and guarded with care. Faronics is
unable to recover a lost or forgotten Customization Code!
Once a new Customization Code is assigned, the Configuration Administrator will
no longer work with previously configured installations. To work with previous
installations, use the DFInit.exe program to reset the Customization Code back to
its original settings.
ENTERPRISE
7
Advertisement
Table of Contents
