Updating Deep Freeze Locally On A Workstation - FARONICS DEEP FREEZE ENTERPRISE - UPDATE PROCEDURE 3-23-2010 Update Manual

Updating Deep Freeze Locally on a Workstation
Complete the following steps to update Deep Freeze Locally on a workstation:
1. Open the Configuration Administrator.
2. Configure the settings as required.
3. Click Create > Create Workstation Install Program.
4. Save the Workstation Install Program to a shared folder on the network that can be accessed
from the workstation to be updated. Alternatively, save it to a removable storage device that
can be moved to a workstation
5. Reboot the workstation Thawed.
6. Deep Freeze can only be uninstalled locally by running the DFWKS.exe. Double-click the
DFWKS.exe and follow the steps presented on the screen to uninstall it on the workstation.
The workstation will reboot after Deep Freeze is uninstalled.
7. Double-click the Workstation Install File again and follow the steps presented on the screen
to install it on the workstation. The workstation will reboot after it is installed.
In order to maintain communication with the workstations when updating a component
to a new version, it is essential that the Network settings of the new Workstation Install
Program or Workstation Seed matches those of the old one.
ENTERPRISE
11