Driver Settings - Edirol FA-66 Owner's Manual

Installing the driver (Windows)

Driver settings

About the input and output devices
In order to get the best performance from the software you are using, you must
choose the correct device settings. The FA-66's audio driver supports WDM and
ASIO 2.0.
Audio devices
Audio output device (WDM)
Audio input device (WDM)
ASIO device
Note 1: Refer to "How WDM ports correspond to FA-66 output jacks" (p. 31).
MIDI devices
MIDI OUT
MIDI IN
* For details on how to make settings for your software, you should also refer to the
owner's manual for your software, as well as to "Software settings" (p. 40).
* If you are unable to select the FA-66 in the device settings of your software, it is
possible that the FA-66 driver was not installed correctly. Please re-install the driver.
30
EDIROL FA-66 Out 1–3
EDIROL FA-66 In 1–3
EDIROL FA-66
EDIROL FA-66 MIDI OUT
If you specify EDIROL FA-66 as the output port for your sequencer
software, etc., messages will be sent from the FA-66's MIDI OUT
connector.
EDIROL FA-66 MIDI IN
If you specify EDIROL FA-66 as the input port for your sequencer
software, etc., messages will be received from the FA-66's MIDI IN
connector.
Note 1
Note 1