Replacing An Ink Tank - Canon 900D - i Color Inkjet Printer Printing Manual

Replacing an Ink Tank

When replacing an ink tank, check the model number very carefully.
The printer will not print properly if the wrong ink tank is used, or installed in the incorrect position.
With this printer, ink tanks must be installed from the right in the order indicated below.
:Magenta
Photo Magenta
:Yellow
Knowing When to Replace Ink Tank
If an ink tank needs replacing the Power lamp will change from green to orange and flash four times as soon
as printing begins. It is important to identify the empty tank using the LCD and replace it.
Should missing characters or white streaks appear despite sufficient ink levels. See "When Printing
Becomes Faint or Colors are Incorrect" on page 37.
The following message appears on the LCD when ink is empty.
Printing will resume as soon as ink tank is replaced and the front cover is closed.
34
: BCI-6M
: BCI-6PM Photo
: BCI-6Y
Empty ink tank
When Low Ink is Detected
When printing starts, the message is displayed on the LCD.
[!] indicates ink low. Obtain a replacement tank as soon as possible.
To continue printing, select Yes and then press the OK button.
To cancel printing, select NO and then press the OK button.
Black : BCI-6BK
Cyan : BCI-6C
Photo Cyan : BCI-6PC Photo
The ink tank with symbol is out of ink.
Replace with a new ink tank.
• Press the Cancel button to cancel the current
print job.
• Press the Resume button to resume printing
with an empty ink tank.
When printing is finished, replace the ink tank
immediately. If you continue printing with an
empty ink tank, it will be a cause of trouble.