Turn On The Printer; Install Ink Cartridges - Epson 3880 - Stylus Pro Color Inkjet Printer Start Here Manual

Turn On the Printer

1
Connect the power cable. (Do not connect the printer cable yet.)
2
Press the Power button.
After a minute, the ink cover is
automatically released.

Install Ink Cartridges

1
Lift the ink cover.
If the ink cover is locked, press the
Note:
cover open button on the control panel to release it.
2
Unpack the 9 ink cartridges and shake each one gently.
3
Install each cartridge in the correct slot for its color. The arrow mark should be on top and
pointing into the printer.
Do not touch the green chip on top of the cartridge.
Caution:
Arrow
4
After you install all 9 ink cartridges, close the cover.
The printer starts charging the ink. This takes 7 or 8 minutes. The LCD displays READY
when charging is complete.
Do not turn off or unplug the printer while the power light is flashing and you see the
Caution:
message CHARGING INK on the LCD. Also, do not lift the ink cover or load paper during the process.
The first time you install ink cartridges, the printer uses some ink to charge the printing system,
Note:
so print yields may be lower with the first cartridges. Subsequent ink cartridges will last for their full
rated life.
Ink cover
Ink
Push each cartridge
in until it clicks.