Table of Contents
Advertisement
3. Select "Obtain an IP address automatically" by clicking once in the circle. Click the OK
button.
Your computer is now ready to use the Router's DHCP server.
Windows 2000
First, check for the IP protocol and, if necessary, install it:
1. In the Windows task bar, click the Start button, point to Settings, and then click Control
Panel.
2. Double-click the Network and Dial-up Connections icon.
3. In the Network and Dial-up Connections window, right-click the Local Area
Connection icon, and then select Properties.
4. The Local Area Connection Properties dialog box displays with a list of currently
installed network components. If the list includes Internet Protocol (TCP/IP), then the
protocol has already been enabled, skip ahead to Configure Windows 2000 for DHCP.
5. If Internet Protocol (TCP/IP) does not display as an installed component, click Install.
6. In the Select Network Component Type dialog box, select Protocol, and then click
Add.
7. Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click OK.
8. You may be prompted to install files from your Windows 2000 installation CD or other
media. Follow the instructions to install the files.
9. If prompted, click OK to restart your computer with the new settings.
Configure Windows 2000 for DHCP
1. In the Control Panel, double-click the Network and Dial-up Connections icon.
2. In Network and Dial-up Connections window, right-click the Local Area Connection
icon, and then select Properties.
3. In the Local Area Connection Properties dialog box, select Internet Protocol
(TCP/IP), and then click Properties.
4. In the Internet Protocol (TCP/IP) Properties dialog box, click the button labeled
Obtain an IP address automatically.
5. Double-click OK to confirm and save your changes, and then close the Control Panel.
DSL-502T ADSL Router User's Guide
11
Advertisement
Table of Contents
