Installing The New Cutter Blade - Epson 11880 - Stylus Pro Color Inkjet Printer Product Information Manual

Epson Stylus Pro 11880
button. The paper cutter holder moves to
4. Press the
the replacement position.
Caution:
Do not try to slide the carriage by hand, or you may damage the
printer.
5. Open the front cover.
6. Locate the cutter assembly with a blue plastic cover on the
left side of the print head.
7. Hold down the side pin as shown and turn the latch to the
right.
Caution:
To avoid damaging the printer, make sure you don't push the side
pin in too far. Do not touch the black parts inside the printer or
the cables around the print head.
8. Release the side pin carefully. The cutter pops out.
: The blade is sharp. Be careful when removing it.
WARNING
8 - Epson Stylus Pro 11880
9. Carefully remove the cutter blade.
Caution:
Wrap the used cutter blade and dispose of it according to local
regulations.

Installing the New Cutter Blade

Remove the new blade from its package, then follow these
steps to install it:
1. Insert the new cutter as shown. Make sure the spring
doesn't pop out.
2. Push down on the side pin while turning the latch to the
left.
3. Close the front cover. The cutter moves to the home (far
right) position.
10/07