Epson 2200 - Stylus Photo Color Inkjet Printer Read This First page 3

Setting Up the PS Server on Macintosh OS X
If you're running OS X, you need to select and set up the PS Server in
the Print Center or Printer Setup Utility before you can print with the
Stylus RIP software. Follow these guidelines:
To use the AppleTalk
that you use as the PS Server must be connected to a network. If
your computer is not connected to a network, use the IP Printing
protocol.
When you select the Printer Model from the drop-down menu on
the Printer List, be sure to select
Do not select
cannot be used with the Stylus RIP driver.
If the message
appears when you're selecting the Printer Model, select
StylusPhoto2200
Stylus Photo 2200, CUPS+Gimp-Print
cannot be used with the Stylus RIP driver.
For more information about setting up the PS Server on OS X, see the
"Printing with PS Server" section in the "Using the Stylus RIP
Professional with Macintosh" chapter of your on-screen User's Guide.
®
and Rendezvous
(all capital letters) because this selection
EPSON
Multiple printer description files were located
from the drop-down list. Do not select
®
protocols, the computer
(initial capital letter only).
Epson
because this selection
Epson
Epson
3