The Channels Page - Kurzweil K2661 Getting Started Manual

Bank Select
BankSelect allows you to choose between having the K2661 respond to Controller 0 or
Controller 32 or both. The reason for this is that various manufacturers have chosen one method
or the other. The four possible values for this parameter are:
0 only
32 only
Ctl 0
Ctl 32
Power Mode
Power Mode has two possible values: User and Demo. When set to User, the user's parameter
settings are retained. When set to Demo several parameters are returned to default values when
the unit is powered up. The default value for the Power Mode parameter is User.
The following parameters are reset when Power Mode is set to Demo.
Master mode:
MIDI Transmit:
Effects mode:
Disk mode:

The Channels Page

Press the CHANLS soft button to select the CHANNELS page, where you can define numerous
parameters for each MIDI channel independently. Use the Chan/Bank buttons to select the MIDI
channel you wish to work on.
The CHANNELS page is very useful when you're doing multi-timbral sequencing, with
programs assigned to numerous MIDI channels. The CHANNELS page lets you set several
control characteristics for each MIDI channel. This makes it easy to adjust the playback of the
sequence without editing the sequence itself. For example, you might turn off the Enable
parameter for one or more channels to mute the tracks on those channels. You could also set the
VolLock parameter to On, to ignore any MIDI volume messages the K2661 receives on a given
MIDI channel.
Parameter
Enable
Responds to controller 0 only.
Responds to controller 32 only.
Responds to 0 or 32.
Responds to 0 or 32.
KB3 Channel resets to 1
Control resets to Both; Channel resets to 1; Transpose resets to 0 ST
FX Mode resets to Auto, and FX Chan resets to Current
Current Disk resets to SMedia
Range of Values
Off, On
MIDI Mode
The Channels Page
Default
On
10-7