Kurzweil MICROPIANO Manual page 19

¥ MIDI cable not securely plugged in at
both ends.
¥ MIDI source not sending data.
¥ MIDI source sending data on wrong
channel (MicroPiano default is Channel 1).
¥ MicroPiano volume control not turned
completely up.
¥ A received MIDI volume message has
speciÞed a low volume.
¥ Audio cables not securely plugged in at
both ends.
¥ Input to audio system is set for low
impedance instead of high impedance.
¥ Input trim to audio system or mixer is
set too low.
¥ Incorrect power module (a DC output
power module will not work).
¥ The MicroPiano is not a General MIDI
compatible device.
¥ Program change numbers not compatible
with MicroPiano program list.
¥ Effects setting messages not compatible with
MicroPiano (see page 18).
¥ The MicroPiano does not respond to
Pitchbend messages.
¥ InsufÞcient ventilation.
¥ Incorrect power module.
¥ Input voltage rating of power module does
not match your power system.
DEMO song plays
but MicroPiano
does not respond
to MIDI
Sound level from
MicroPiano is too
low or is distorted
Pre-recorded or
"General MIDI"
sequences do not
play correctly
Power module
or MicroPiano
overheats
15