Table of Contents
Advertisement
The K2600 records path information up to the disk level. In other words, the K2600 tracks your
movement within directories and partitions (but not from disk to disk). As long as you're
addressing the same disk, the K2600 has all the information it needs to load or save files (or any
other Disk-mode command).
When you select a different disk, the first command you execute causes the K2600 to prompt
you to select a partition. Once you do so, you won't see the prompt again until the next time you
change disks and execute another command.
The following table summarizes the changes (if any) in the twelve disk operations:
Load
Save
Macro
Delete
Backup
Copy
Sleep
Format
Rename
Move
Util
NewDir
Navigation
Many disk-operation dialogs (the Save dialog, for example) include file lists, where you select
the file to save, delete, copy, or whatever. Any time you're navigating through the directories in
a file list, you can select a different partition.
1. Press the Root soft button to select the root directory for the current partition. The path
information in the top line of the display will look something like
other numeral) is the partition ID, and the backslash (
can also press Parent one or more times to get to the root directory.)
2. Press Root or Parent to display the partition selector, which prompts you to select a
partition to mount.
3. Select a partition ID, then press OK.
The quickest way to get to the partition selector is to press Root twice in succession. This brings
you to the partition selector from anywhere in the file list.
Support for selecting different partitions; see Navigation on page 3-9.
Support for selecting different partitions; see Navigation on page 3-9.
Macro IDs include partition IDs; supports multi-disk macro files. See page 3-11.
Support for selecting different partitions; see Navigation on page 3-9.
Support for backups across partitions, and between directories within partitions. See
page 3-10.
Support for copies across partitions, and between directories within partitions. See
page 3-10.
Unchanged (puts current disk to sleep, or ejects removable media).
Support for multiple partitions; see Partitioning Your Hard Disk on page 3-1.
Support for selecting different partitions; see Navigation on page 3-9.
Unchanged (you can't move files across partitions; see Backups and Copies)
Several changes; see Utilities on page 3-10
Support for selecting different partitions; see Navigation on page 3-9
Disk Partitioning
. The
Dir:0\
) denotes the root directory. (You
\
Disk Mode
(or some
0
3-9
Advertisement
Table of Contents
