Table of Contents
Advertisement
Swim Jet Pumps
Air Volume Controls
Dimension One Filtration System
Warning - do not attempt opening filter while pumps are in operation!
Servicing Filter Element
It is imperative that you read and become familiar with the Clean and clear filter system.
Please read and follow the instructions in the attached Filter Manufacturer's owner's manual.
Aquatic Fitness System
2002 Owner's Manual
Produce water flow through the swim jets. The swim jet pumps are
high-speed pumps only. The second and third pump buttons control
these pumps.
Regulate the amount of air that mixes with the water in the swim
jets to create more volume in the swim flume. The more air you
add to the jets, the stronger the current becomes. You may want
to begin your swim training on the lowest setting and gradually
work your way up to more volume.
Before you start, be sure to read the Filter Manufacturer's owner's manual
that came with your system.
To clean or replace the filter element, shut off power to the
Aquatic Fitness System, loosen the lock-ring, remove the filter
cover and pull the filter element from the filter housing. Depending
upon use, you may simply rinse the filter element with a garden
hose, or you may be required to soak the element in Filter Cleaner
Solution. Replace any worn or damaged filter elements. It is always
good practice to have a spare filter element, so that you can
perform filter maintenance at your convenience.
9
Advertisement
Table of Contents
